Robot Manager

Controls or outputs information about the selected robot.

Socket information

• IN0: God mode ON/OFF.
• IN1: Speed modifier (0.0-1.0). Only enabled if the cable is plugged in. A value of 0.0 means the robot is unable to walk.
• IN2: Disable action (useful for disabling box mode until certain power up is enabled).
• IN3: Jump strength multiplier.
• IN4: HP increase (heal), value * 10
• IN5: HP decrease (damage), value * 10
• IN6: Max HP increase, value * 10
• IN7: Max HP decrease, value * 10
• IN8: Weapon damage multiplier 0.0 = No extra damage, 1.0 = 5 times the damage.
• IN9: Toggle robot action.
• IN10: Walk left.
• IN11: Walk right.
• IN12: Stop all movement.
• IN13: Jump.
• IN14: Aim.
• IN15: Attack.
• IN16: Attach to nearest backpack/RC
• IN17: Detach from any backpack/RC
• IN18: Respawn
• IN19: Freeze
• IN20: Toggle roaming (non-adventure robots only).
• IN21: Cycle weapons
• IN22: Cycle factions
• OUT0: Weapon arm angle
• OUT1: Tool arm angle
• OUT2: On weapon fire
• OUT3: On tool use (experimental)
• OUT4: Current layer. 0.0 = layer 1, 0.5 = layer 2, 1.0 = layer 3
• OUT5: Head removed
• OUT6: Moving left - User attempting to move left (adventure robot only)
• OUT7: Moving right - User attempting to move right (adventure robot only)
• OUT8: Look dir (left = 0.0, right = 1.0)
• OUT9: dir - Last movement dir (left = 0.0, right = 1.0)
• OUT10: Action active
• OUT11: 1.0 if attached to anything, otherwise 0
• OUT12: Movement left feedback (adventure robot only)
• OUT13: Movement right feedback (adventure robot only)
• OUT14: jump feedback (adventure robot only)
• OUT15: aim feedback (adventure robot only)
• OUT16: layer up feedback (adventure robot only)
• OUT17: layer down feedback (adventure robot only)
• OUT18: action feedback (adventure robot only)